What kind of process to choose to make IC membership card looks more high-grade

IC card can be divided into contact IC card and induction IC card, at present many places are using induction IC card. Now many high-grade hotels, ktvs and guesthouses choose induction IC cards as their membership cards, but what kind of card process is added to these IC cards to make them look more high-grade?

What kind of process to choose to make IC membership card looks more high-grade

The types of process that can be added to make high-grade IC membership cards are as follows

1. White PVC material can be used, the surface can be made into frosted, glossy or matte effect; it can also be made into translucent or completely transparent material.

2. Can be made into square, round and any other irregular shapes, such as keychain access cards, etc.

3. The standard thickness of contact IC card (chip outside) is 0.84mm, the standard thickness of ID and M1 card (invisible chip) is from 0.84 to 1.0mm, other thicknesses, need to open special edition.

4. the standard size of the card is 85.5mm54mm, rounded corners, can also be made into other sizes.

5. The card can be printed as single-sided or double-sided, using screen printing, offset printing (CMYK four-color printing) or screen plus offset printing method.

6. the background color of the card can be made into imitation gold or imitation silver, that is, gold bottom, silver bottom.

7. can be sprinkled on the card gold powder, silver powder, the effect after printing gold and silver shiny.

8. can be added to the signature strip or writing board (you can manually write the area), the signature strip has a white signature, gray signature, transparent sign, flower sign (pattern sign).

9. can hit the laser code (smart cards need to hit the code, it is recommended to use this process).

10. Can play convex code, convex code can be hot stamping gold or silver; card numbers can be sequentially arranged, but also can play personalized, irregular numbers (because there are coils and chips in the smart card, so it is recommended to use this process as little as possible to avoid damage to the coils or chips).

11. can be stamping on the card by automatic stamping machine, common stamping into gold and silver, and green gold, blue gold, red gold and other colors.

12. can be sprayed on each card with different numbers, PIN codes or text.

13. can punch round holes or strip holes on ordinary cards; other holes need to open the abrasive.

14. can be over UV oil, printing enterprise LOGO, focus on promoting the advantages of enterprise part.

15. can be added to the card with protective film.